AirTAC - วาล์วควบคุมทิศทางการไหลด้วยแรงลม ชนิด 3/2 ทาง รุ่น 3A (3A Series)

AirTAC - วาล์วควบคุมทิศทางการไหลด้วยแรงลม ชนิด 3/2 ทาง รุ่น 3A (3A Series)

AirTAC - วาล์วควบคุมทิศทางการไหลด้วยแรงลม ชนิด 3/2 ทาง รุ่น 3A (3A Series)
AirTAC - วาล์วควบคุมทิศทางการไหลด้วยแรงลม ชนิด 3/2 ทาง รุ่น 3A (3A Series)

FEATURES

AirTAC - วาล์วควบคุมทิศทางการไหลด้วยแรงลม ชนิด 3/2 ทาง รุ่น 3A (3A Series)

  1. Structure in sliding column mode: good tightness and sensitive reaction;
  2. Double air control valves have memory function;
  3. Internal hole adopts special processing technology which has little attrition friction, low start pressure and long service life;
  4. No need to add oil for lubrication
  5. Malti-mounting helps to install and apply.
  • Specifications | AirTAC - วาล์วควบคุมทิศทางการไหลด้วยแรงลม ชนิด 3/2 ทาง รุ่น 3A (3A Series)

    Model3A110-M53A120-M53A110-063A120-06
    Fluid Air (to be filtered by 40µm filter element)
    Acting Exterioi control
    Port size (1) M5 1/8"
    Orifice size 5.5 mm2 (Cv = 0.31) 12.0 mm2 (Cv = 0.67)
    Valve type 3 port 2 position
    Lubrication (2) Not required
    Operating pressure 0.15~0.8 MPa (21 ~ 114 psi)
    Temperature -20~70 °C
    Material of body Aluminum alloy
    Max. frequency (3) 5 cycle/sec
    1. NPT thread and G thread are available
    2. It can not stop in the midway of lubricating, Lubricants like ISO VG32 or equivalent are recommended
    3. The Maximum actuation frequency is in the no-load state.
  • Ordering code | AirTAC - วาล์วควบคุมทิศทางการไหลด้วยแรงลม ชนิด 3/2 ทาง รุ่น 3A (3A Series)

    Ordering code for manifold

    Example: 3A11006NOT

    How to Select: 3A(1) 1(2) 10(3) 06(4) NO(5) T(6)

    (1) Model(2) Code(3) Size series(4) Port size(5) Acting type(6) Electrical entry
    3A: Air valve (3/2 way) 1: 100 series 10: Single air control
    20: Double air control
    M5: M5
    06: 1/8"
    NC: Normally close
    NO: Normally open
    T: NPT
    G: G
    1. Remark: 2 position double control air valve have no differences between normally opened and normally closed state, thus this code is blank.
    2. When the thread is M5. the code is blank.
  • Inner structures | AirTAC - วาล์วควบคุมทิศทางการไหลด้วยแรงลม ชนิด 3/2 ทาง รุ่น 3A (3A Series)

    Inner structures 3A series
    Inner structures 3A series
    No.ItemNo.Item
    1 Bottom cover gasket 7 O-Ring
    2 Spring 8 Wear ring
    3 Bottom cover 9 Piston
    4 Botom cover screw 10 Pilot body
    5 Spool 11 Piston O-ring
    6 Body 12 Pilot screw
  • Flow chart | AirTAC - วาล์วควบคุมทิศทางการไหลด้วยแรงลม ชนิด 3/2 ทาง รุ่น 3A (3A Series)

    Flow Chart AirTAC - วาล์วควบคุมทิศทางการไหลด้วยแรงลม ชนิด 3/2 ทาง รุ่น 3A series

  • Dimensions | AirTAC - วาล์วควบคุมทิศทางการไหลด้วยแรงลม ชนิด 3/2 ทาง รุ่น 3A (3A Series)

    Dimensions AirTAC - วาล์วควบคุมทิศทางการไหลด้วยแรงลม ชนิด 3/2 ทาง รุ่น 3A series
    Dimensions AirTAC - วาล์วควบคุมทิศทางการไหลด้วยแรงลม ชนิด 3/2 ทาง รุ่น 3A series

นิวแอนด์ไฮด์ สำนักงานใหญ่

  • 549/9 ถนนอ่อนนุช แขวงประเวศ
    เขตประเวศ กรุงเทพ ฯ 10250

  • เวลาทำการ : จ.-ศ. (08.00น. - 17.30น.)
  • Tel : 0-2743-8999
  • Fax : 0-2743-8990
  • E-mail : This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Line ID : @pneuhyd, pneu_hyd

Copyright ® 2021 Pneu-hyd.CO.,Ltd All Rights Reserved Pneu&Hyd.co.th